587 lines
24 KiB
Plaintext
587 lines
24 KiB
Plaintext
H2OFFT (Flash Firmware Tool) for EFI
|
|
|
|
Version 2.22
|
|
------------
|
|
1. Correct the UI when doing device firmware update via 23h/24h.
|
|
2. Support special update flow of -pbi:TYPE command. [For specific OEM/ODM]
|
|
Support following flow for -pbi:TYPE command update on BIOS Guard enabled platform.
|
|
a. Copy the input file to ESP (or USB) EFI\Insyde\BIOSGUARDLOGO.bin.
|
|
b. Trigger update feature via writing variable.
|
|
c. After restart system BIOS will update the binary directly.
|
|
|
|
Version 2.21
|
|
------------
|
|
1. Fix the issue that data in BIOS image BVDT (with multi model name and multi version) will be changed after write to ROM.
|
|
Ex: binary BVDT -> Model_1,Model_2,Model_3[0x00]
|
|
After write to ROM -> Model_1[0x00]Model_2[0x00]Model_3[0x00]
|
|
2. Add platform.ini [UI] IndentSpace to control the model name and BIOS version message location.
|
|
3. Add platform.ini [UI] IndentSpace2 to control the update XXX message location.
|
|
4. Support UTF16 format platform.ini file.
|
|
NOTE: UTF16 format platform.ini only number settings and single-byte character set message strings are valid in shell/secure flash.
|
|
Any character using double-byte character set will be change to space character.
|
|
5. Support to update ME sub region (ISH/PDT/IOM/MGPHY/TBT) only capsule.
|
|
6. Add -retimer:FILE and -winux:FILE command for copy retimer capsule to ESP and trigger Windows capsule update.
|
|
Tool will copy the retimer file to ESP EFI\UpdateCapsule\CapsuleUpdateFile1000.bin,
|
|
and copy the winux file to ESP EFI\UpdateCapsule\CapsuleUpdateFile0001.bin in default,
|
|
If the target filename is not expected, you can use -norenmae to let tool only copy and keep original filename.
|
|
Usage:
|
|
H2OFFT-Sx64.efi -retimer:Retimer.bin -winux:Winux.bin
|
|
or
|
|
H2OFFT-Sx64.efi -retimer:CapsuleUpdateFile1000.bin -winux:CapsuleUpdateFile0001.bin -norename
|
|
|
|
Version 2.20
|
|
------------
|
|
1. Support new parameter-buffer based SMI function calling (IB02961344).
|
|
|
|
|
|
Version 2.12
|
|
------------
|
|
1. Support specific OEM vendor ID for non share EC firmware update with version and size check. [For specific OEM/ODM]
|
|
2. Support BIOS customize update sequence feature. And the max support update block count is 24.
|
|
|
|
Version 2.11
|
|
------------
|
|
1. Support to update ME only capsule.
|
|
2. Support EC_Compare, EC_Verify, EC_VerifyErrorRetry in platform.ini [UpdateEC] section.
|
|
3. Add [AC_Adapter] Flag=2~4, when Flag >= 2 the BatteryCheck setting will not be referenced.
|
|
Now the power check behavior as below:
|
|
Flag=0: Don't check AC power and battery life percentage.
|
|
Skip power check and continue flash.
|
|
Flag=1: Check AC power not check battery life percentage.
|
|
Only AC power meets the requirement can continue flash.
|
|
Flag=2: Check battery life percentage not check AC power.
|
|
Only DC power meets the requirement can continue flash.
|
|
Flag=3: Check AC power and battery life percentage.
|
|
Both AC and DC power meet the requirement can continue flash.
|
|
Flag=4: Check AC power or battery life percentage.
|
|
One of AC or DC power meets the requirement can continue flash.
|
|
4. Update iFdPacker to v2.5.5
|
|
4-1. [Windows] Add OEM/ODM files in packing list.
|
|
|
|
Version 2.10
|
|
------------
|
|
1. Add [SecureUpdate] viaESP=3 setting as default and update behavior.
|
|
When viaESP=0, it will pass capsule via memory only. (BIOS need to have enough reserved memory to store whole capsule file.)
|
|
When viaESP=1, it will pass capsule via ESP only. (BIOS need to support via ESP method.)
|
|
Flash process will terminate when BIOS not support via ESP method or copy file to ESP failed.
|
|
When viaESP=2, it will copy capsule to ESP then pass capsule to BIOS via memory.
|
|
It success when both steps are success, and failure when any one failed.
|
|
When viaESP=3, It will try to update capsule via ESP first.
|
|
It success when via ESP method success and will not do via memory method.
|
|
When via ESP method failed it will use pass capsule to BIOS via memory.
|
|
2. Support to update the capsule file which contains native ME, BIOS region and external EC.
|
|
|
|
Version 2.09
|
|
------------
|
|
1. Fix EC only capsule will fail on boot guard verification issue.
|
|
|
|
Version 2.08
|
|
------------
|
|
1. Support specific OEM vendor ID for EC firmware update. [For specific OEM/ODM]
|
|
2. Update iFdPacker to v2.5.4
|
|
2-1. Fix Windows command line sometimes can not pack correctly issue.
|
|
|
|
Version 2.07
|
|
------------
|
|
1. Support kernel code 5.4 (enable PcdH2OIhisiAuthEnabled and PcdH2OIhisiAuthSupported).
|
|
2. Fix ini override not work when multi-FD feature enabled issue.
|
|
|
|
Version 2.06
|
|
------------
|
|
1. Support [Bios_Version_Check] Flag=3 and 4 to meet different BIOS version check scenario.
|
|
When need to do BIOS version check by BIOS only, please set Flag=3.
|
|
When need to do BIOS version check by BIOS and application, please set Flag=4. (For the case that BIOS only want to ban specific version.)
|
|
2. Remove [Bios_Version_Check] CheckByBios setting, because it is a subset of Flag=3 or 4.
|
|
The behavior of original setting [Bios_Version_Check] Flag=1 CheckByBios=1 in shell flash is the same as new setting [Bios_Version_Check] Flag=4.
|
|
(For backward compatible, this setting can work when Flag=0, 1, 2. When Flag=3 or 4, this setting won't be referenced.)
|
|
|
|
Version 2.05
|
|
------------
|
|
1. Support boot guard version verification.
|
|
|
|
Version 2.04
|
|
------------
|
|
1. Support specific OEM command override. [For specific OEM/ODM]
|
|
2. Update iFdPacker to v2.5.3
|
|
2-1. Fix 64bit Windows single package cannot run correctly on Win10 RS6 issue.
|
|
(32bit package still have this issue in this version.)
|
|
|
|
Version 2.03
|
|
------------
|
|
1. Correct [Flash Complete] pause behavior.
|
|
When set [Flash Complete] pause=1, secure flash will show "Press any key to continue...".
|
|
Old (incorrect) behavior: When set [Flash Complete] pause=1, flash secure binary it will pause after passing capsule to BIOS.
|
|
New (correct) behavior: When set [Flash Complete] pause=1, flash secure binary it will do action (reboot) after passing capsule to BIOS.
|
|
Only doing legacy (normal) flash in EFI shell it will pause after flash complete.
|
|
|
|
Version 2.02
|
|
------------
|
|
1. Support [UI] ExtEcUpdateErrorMessage### settings in platform.ini.
|
|
The ### is number in hex, valid range 1~FFFFFFFF.
|
|
It will be shown when EC version check error.
|
|
2. Fix shell flash hang when doing ini override issue.
|
|
|
|
Version 2.01
|
|
------------
|
|
1. Support \r\n on all message string in platform.ini.
|
|
2. Add [Platform_Check] NotTargetPlatformErrorMessage, [Bios_Version_Check] SameVersionErrorMessage and OlderVersionErrorMessage for error message customization.
|
|
3. Show warning message when user input a no function command for flash secure BIOS.
|
|
Ex: Using -bios -all for flashing secure capsule will get this warning message.
|
|
To make the flash purpose settings workable, please set it in platform.ini.
|
|
|
|
Version 2.00
|
|
------------
|
|
1. Support passing EC data to BIOS for EC version check. [For specific OEM/ODM]
|
|
And add [UI] ExtEcUpdateErrorMessage for EC binary not allow to flash with -extec: command.
|
|
2. Support query external EC version with -ecver:EC_FILE command. [For specific OEM/ODM]
|
|
This EC_FILE can be EC binary only file or a secure capsule with EC binary in it.
|
|
3. Support Intel Runtime BIOS Resilience (Intel Copper Point).
|
|
4. Fix singlepackage cannot run in a sub folder issue on some version of shell (such as v2.2).
|
|
5. Update iFdPacker to v2.5.2
|
|
5-1. Support not show extract progress dialog in single package when run with -s command.
|
|
6. Show error message "We were unable to upgrade BIOS. Please check your disk." when copy/compare capsule to ESP failed 3 times. (for secure flash via ESP)
|
|
7. Add [SecureUpdate] ViaESPCopyFileWaitingTime to wait input seconds after secure capsule file copy.
|
|
|
|
|
|
|
|
Version 1.4b
|
|
------------
|
|
1. Support update EC only capsule to Intel external region.
|
|
2. Normal flash supports to update EC to Intel external region with extec:EC_FILE command.
|
|
3. Reference platform.ini [FlashComplete] Action setting when update native ME only capsule.
|
|
4. Update iFdPacker to v2.5.0
|
|
4-1. Support to pack default argument for windows package.
|
|
Check "Pack Argument" in UI or use -winarg in command line for this feature.
|
|
|
|
Version 1.4a
|
|
------------
|
|
1. Add [SecureUpdate] DeviceOrder key in platform.ini to support customizing FAT device detection sequence of secure flash via ESP feature.
|
|
|
|
Version 1.3z
|
|
------------
|
|
1. Add [PassToBios] section for passing ini settings to BIOS.
|
|
2. Support device firmware update.
|
|
|
|
Version 1.3y
|
|
------------
|
|
1. Support 32MB ROM.
|
|
2. Support to pass command to secure flash.
|
|
3. Update iFdPacker to v2.4.8
|
|
3-1. Fix shell/DOS single package may incorrect and cause flash fail issue.
|
|
(The file size may incorrect in header when the packed file was replaced with same filename but different size file.)
|
|
|
|
Version 1.3x
|
|
------------
|
|
1. Support secure flash via ESP with ATAPI device.
|
|
|
|
Version 1.3w
|
|
------------
|
|
1. Fix check version by BIOS feature didn't work issue.
|
|
2. Update version check behavior to meet OEM spec. [For specific OEM/ODM]
|
|
|
|
Version 1.3v
|
|
------------
|
|
1. Support -pbi:TYPE command to flash protected region. [For specific OEM/ODM]
|
|
2. Support admin password check (-pwd:PASSWORD) in flash protected region feature (with -pbi:TYPE). [For specific OEM/ODM]
|
|
|
|
Version 1.3u
|
|
------------
|
|
1. Fix secure flash via ESP method does not reference BIOS return action code issue.
|
|
|
|
Version 1.3t
|
|
------------
|
|
1. Enumerate all FAT partition and get first suitable partition (has EFI folder) for secure flash via ESP method.
|
|
|
|
Version 1.3s
|
|
------------
|
|
1. Try to read ROM again when it read failed because ME is locked.
|
|
2. Fix version check not work issue.
|
|
3. Fix [Log_file] Flag=1 cannot save out log file issue.
|
|
4. Fix when flashing ROM it doesn't read block for compare before writing issue.
|
|
|
|
Version 1.3r
|
|
------------
|
|
1. Support doing secure flash via S3 method.
|
|
2. Support secure flash via ESP with NVMe device.
|
|
3. Update iFdPacker to v2.4.7
|
|
3-1. Fix crash problem of program in console mode after packing.
|
|
3-2. Fix memory leak problem when pack platform.ini in EFI package.
|
|
|
|
Version 1.3q
|
|
------------
|
|
1. Fix the passing platform.ini to BIOS feature not terminate with [55AA] issue.
|
|
2. Support -p=<password> command. [For specific OEM/ODM]
|
|
|
|
Version 1.3p
|
|
------------
|
|
1. Support update Intel native ME with -nativeme and -oemid command. (BIOS version required: 05.05.07.0019)
|
|
Usage: H2OFFT-Sx64.efi -nativeme:ME.bin -oemid:12345678-1234-1234-1234-123456789ABC
|
|
2. Passing platform.ini [Region] section to BIOS via IHISI 1Dh.
|
|
3. Support multi-SKU package. [For specific OEM/ODM]
|
|
4. Update iFdPacker to v2.4.6
|
|
2-1. Fix single package can not pass arguments to flash tool correctly. (For Windows flash only)
|
|
|
|
Version 1.3o
|
|
------------
|
|
1. Fix EC cannot update issue.
|
|
|
|
Version 1.3n
|
|
----------------
|
|
1. Normal flash support UseBvdtRomMap feature.
|
|
2. When update native me only, skip to check model name and version.
|
|
3. Fix update via ESP will fail issue.
|
|
|
|
Version 1.3m
|
|
----------------
|
|
1. Remove -nativeme and -oemid command.
|
|
For updating Intel native ME only, please using Windows capsule update or Insyde secure flash method.
|
|
2. Support BVDT multiple product name and multiple bios version.
|
|
3. Upadte iFdPacker to v2.4.2
|
|
3-1. Support packing capsule which without BIOS image (Such as a capsule with Intel native ME only).
|
|
|
|
Version 1.3l
|
|
----------------
|
|
1. Fix the isssue that a non-PFAT BIOS can be flashed on a PFAT enabled platform.
|
|
2. When input image contains BIOS region only, it don't need to set [Region] bios=1 or use command -bios. AP can auto detect and recognize input image.
|
|
3. Support update Intel native ME with -nativeme and -oemid command. (BIOS version required: 05.05.07.0019)
|
|
Usage: H2OFFT-Sx64.efi -nativeme:ME.bin -oemid:12345678-1234-1234-1234-123456789ABC
|
|
4. Support customize EC update block size.
|
|
5. Add Private/Protection Region Movement feature.
|
|
6. Support update PFAT image with secure capsule method.
|
|
It's a secure capsule contains PFAT header and cer data, and will be updated using secure flash process.
|
|
It will doing PFAT update in secure flash (after reboot) not in OS.
|
|
NOTE: The new PFAT update method need BIOS to enable secure flash and PFAT feature at the same time when building.
|
|
|
|
Version 1.3k
|
|
----------------
|
|
1. Fix -edt command string type (Unicode string) size incorrect issue.
|
|
2. Fix AP will return success to BIOS when flash failed.
|
|
3. Update -edt command file type behavior.
|
|
When file size is larger than 256KB, AP will call IHISI 42h multiple times to pass the data to BIOS and each time transfer 64KB data.
|
|
4. Fix the issue that when setting [UpdateEC] Flag=1 in platform.ini to do secure flash with EC, AP will flash EC in OS and flash it again in UEFI.
|
|
|
|
Version 1.3j
|
|
----------------
|
|
1. Fix the logic error of "ME is locked".
|
|
2. Correct write ROM verify behavior. (original code didn't do retry.)
|
|
3. Support -priv command to query private region map from IHISI 12h.
|
|
4. Fix AP will not reboot or shutdown when using -e: with -r or -s command.
|
|
|
|
Version 1.3i
|
|
----------------
|
|
1. Update secure flash via ESP behavior for backward compatible.
|
|
2. Update flash sequence let the BVDT block update at the end of flash process.
|
|
|
|
Version 1.3h
|
|
----------------
|
|
1. Fix update fail issue when input a BIOS region only FD with EC without command -ecbp.
|
|
2. Fix [Others] DisableSecureCapsuleFlash setting not work issue.
|
|
3. Supports command -pi.
|
|
4. Supports command -eob.
|
|
5. Fix it didn't reboot after PFAT update issue.
|
|
6. Add PlatformIniEditor tool in tools folder.
|
|
It's an easy to use platform.ini editor with UI.
|
|
7. Fix the memory for IHISI may allocated higher than 4G issue. (ITS#33259)
|
|
8. Fix it will show size not match error message when flashing a capsule with EC.
|
|
|
|
Version 1.3g
|
|
----------------
|
|
1. Fix command -edt fail in 32bit platform.
|
|
2. Fix Ihisi 10h error in check support status.
|
|
|
|
Version 1.3f
|
|
----------------
|
|
1. Support type MEMORY in [Multi_FD].
|
|
2. Update behavior to NOT call Ihisi 48h if enable viaESP of [SecureUpdate].
|
|
|
|
Version 1.3e
|
|
------------
|
|
1. Support EC flash flag of Ihisi 19h.
|
|
2. Disable command /forcetype. [For specific OEM/ODM]
|
|
|
|
Version 1.3d
|
|
------------
|
|
1. Add eMMC for visESP feature. (specific BIOS version required)
|
|
2. Support Action_20h in [UpdateEC] for passing action code via Ihisi 20h. [For specific OEM/ODM]
|
|
3. Fix NOT protect region in PFAT update.
|
|
4. Fix update error if Ihisi 41h implemented but not supports PFAT.
|
|
5. Fix update error of alias to type#xx (BB_PEI,DXE,EC) in [ForceFlash]. (#31396)
|
|
|
|
Version 1.3c
|
|
------------
|
|
1. Add warning message for Ihisi 15h fail.
|
|
2. Add warning message for DC not connected when checking both AC and DC.
|
|
|
|
Version 1.3b
|
|
------------
|
|
1. Fix CheckByBios of [Bios_Version_Check] not works.
|
|
2. Fix BIOSVFEnable of [BIOSVersionFormat] not works.
|
|
3. Fix update error if alp of [ForceFlash] enabled.
|
|
4. Fix DisableVerify of [Others] not works.
|
|
|
|
Version 1.3a
|
|
------------
|
|
1. Support command -OemCus for specific string of Ihisi 19h. [For specific OEM/ODM]
|
|
2. Fix command -acb NOT check power status.
|
|
|
|
Version 1.2z
|
|
------------
|
|
1. Upadte iFdPacker to v2.4.0
|
|
1-a. fix issue of exception occurred in packing EFI flash.
|
|
1-b. disable UAC.
|
|
|
|
Version 1.2y
|
|
------------
|
|
1. Add new section [AutoWakeup] with key that can enable auto power on via RTC.
|
|
2. Support EC size un-defined in IHISI 21h. (IHISI version required: 2.0.4)
|
|
3. Support command "-extrFD" to extract FD in package mode. (IFDPacker version required: 2.3.9)
|
|
Usage: -extrFD [path]
|
|
4. Fix issue of command "-n", "-r", "-s" not works if update EC only.
|
|
5. Fix issue of AP hangs if runs couple times without reboot in some platform. (#0030516)
|
|
6. Update command -g to check file name valid before IHISI 14h.
|
|
7. Upadte iFdPacker to v2.3.9
|
|
7-a. supports command "-extrFD".
|
|
7-b. add option x64/ia32 for EFI.
|
|
8. Update the IHISI version for funcation 10h to 204.
|
|
|
|
Platforms support 0x1F
|
|
------------+--------------------
|
|
Broadwell 05.03.51.0014
|
|
SharkBay 03.73.06.1067
|
|
Bay Trail-T 05.03.47.0033
|
|
Bay Trail-M 05.03.47.0021
|
|
Kaveri 03.74.03.1015
|
|
Mullins 03.74.03.1009
|
|
Kabini 03.74.03.2047
|
|
Richland 03.74.03.1052
|
|
|
|
Version 1.2x
|
|
------------
|
|
1. Add IHISI 1Fh to notice BIOS can enter/leave EC idle mode .
|
|
2. Add new key "Elapse" under [UI] which can enable to show Elapse time on screen.
|
|
3. Fix cannot flash issue (with update BIOS failed message) on 32bit platform. (#29844, #29840)
|
|
|
|
Version 1.2w
|
|
------------
|
|
1. Support command -mfg.
|
|
2. Fix issue of update error if alp enabled.
|
|
3. Apply new utility naming.
|
|
4. Upadte iFdPacker to v2.3.5
|
|
4-1. Update UI
|
|
4-2. Fixs issue to avoid to add duplicate file in H2OFFT folder.
|
|
4-3. Support new utility nameing.
|
|
4-4. Support drag to select file or folder.
|
|
|
|
Version 1.2v
|
|
------------
|
|
1. Support viaESP in [SecureUpdate]. [specific BIOS version required]
|
|
2. Fix to stop update if ATP Dtimer check (Ihisi 1Ch) fail.
|
|
3. Fix issue of command "-n", "-r" not works. (#28762)
|
|
|
|
Version 1.2u
|
|
------------
|
|
1. Support EDK2 shell.
|
|
2. Fix issue of if ME field omitted in [Multi_FD] enabled.
|
|
3. Fix issue of command -ab will check AC plugin.
|
|
4. Fix message print cut off when secure boot support but 1Eh not support.
|
|
5. Fix to FD filename case insensitive if [Multi_FD] enabled.
|
|
6. Fix issue of make log file error when the platform with NOT only one disk.
|
|
7. Fix issue of update error if NOT only one NV Storage from Ihisi 1Eh.
|
|
8. Support multi region PEI.
|
|
9. Upadte iFdPacker to v2.3.4
|
|
9-1. Fix issue of incorrent warning message in shell mode.
|
|
|
|
Version 1.2t
|
|
------------
|
|
1. Support -nopause -forceit -forcetype commands. [For specific OEM/ODM]
|
|
2. Support [UpdateOEMME].
|
|
3. Upadte iFdPacker to v2.2.3
|
|
3-1. Support to pack resource file in shell mode.
|
|
4. Support command -edt.
|
|
5. Fix issue that cannot update when inputting only BIOS image without ME or others.
|
|
|
|
Version 1.2s
|
|
------------
|
|
1. Fix IHISI 10h return permission is denied still can flash issue.
|
|
2. Support pause in [FalseComplete].
|
|
3. Support EC_DockWarning in [UpdateEC].
|
|
|
|
Version 1.2r
|
|
------------
|
|
1. Display EC update process.
|
|
2. Fix flash utility won't reboot after EC updating.
|
|
3. Fix DC boundary display incorrect issue.
|
|
4. Update EC flash behavior.
|
|
When flashing EC, BIOS must provide EC part information by IHISI.
|
|
Otherwize it will get a "Get EC part infromation fail." error.
|
|
|
|
Version 1.2q
|
|
------------
|
|
1. Support IHISI 16h after EC updating.
|
|
2. Update IHISI 10h behavior to call once.
|
|
3. Update IHISI 15h behavior when ME locked.
|
|
|
|
Version 1.2p
|
|
------------
|
|
1. Support PFAT update with region protection.
|
|
|
|
Version 1.2o
|
|
------------
|
|
1. When flashing an unsigned PFAT image, display meaningful error message instead of "file size not match".
|
|
2. Fix error of LauncherAcWarning of [AC_Adapter] for secure update.
|
|
|
|
Version 1.2n
|
|
------------
|
|
1. Support alp of [ForceFlash] in command filter feature for security flash.
|
|
|
|
Version 1.2m
|
|
------------
|
|
1. Update OEM message when flashing secure image on normal platform and normal image on secure platform. [For specific OEM/ODM]
|
|
2. Update [BIOSVersionFormat] to support new type D (Don't care field). Detail
|
|
Usage please reference the descriptions in platform.ini
|
|
3. Support LauncherAcWarning of [AC_Adapter] for AC warning message.
|
|
|
|
Version 1.2l
|
|
------------
|
|
1. Passing flash status to BIOS when flash complete by IHISI 16h.
|
|
2. Notify BIOS the flash result by IHISI 1Ah.
|
|
|
|
Version 1.2k
|
|
------------
|
|
1. Fix -acb no effect issue.
|
|
|
|
Version 1.2j
|
|
------------
|
|
1. Support -unvs, -ufc, -skipsbp in command filter feature.
|
|
2. Add warning message in save BIOS command (-g) when ME is locked.
|
|
3. Upadte iFdPacker to v2.2.8
|
|
3-1. Support packing multi FD for SHELL package.
|
|
3-2. Remove argument filter check box.
|
|
|
|
Version 1.2i
|
|
------------
|
|
1. Support PFAT image flash on platform PFAT feature disable. (BIOS version required: SharkBay 03.72.37.0018)
|
|
2. Support PFAT checksum verify.
|
|
3. Support [Bios_Version_Check] in platform.ini.
|
|
4. Support [Platform_Check] in platform.ini.
|
|
5. Support [BIOSVersionFormat] in platform.ini.
|
|
6. Support command filter feature.
|
|
7. Support [PlatformVersion] in platform.ini.
|
|
8. Support [FlashSecureBIOSOverride] in platform.ini.
|
|
9. Support [Others] in platform.ini.
|
|
10. Support [Multi FD] in platform.ini.
|
|
|
|
Version 1.2h
|
|
------------
|
|
1. Add "-acb" command.
|
|
2. Support ini override for secure capsule update.
|
|
3. Upadte iFdPacker to v2.2.7.
|
|
3-1. Support packing multi FD for DOS package.
|
|
3-2. Update the behavior of pack platform.ini for secure image for DOS and Shell package.
|
|
(Don't disable platform.ini pack option when secure image detected for DOS and Shell package.)
|
|
4. Support PFAT image update. (BIOS version required: SharkBay 03.72.37.0018)
|
|
|
|
Version 1.2g
|
|
------------
|
|
1. Fix model name compare incorrect issue.
|
|
|
|
Version 1.2f
|
|
------------
|
|
1. Support OEM secure flash behavior. [For specific OEM/ODM]
|
|
2. Add -ec and -ecb command and [UpdateEC] Progress_Bar in platform.ini to support update whole EC image in single IHISI call.
|
|
3. Upadte iFdPacker to v2.2.6.
|
|
3-1. Fix message error of Windows single package run in DOS mode.
|
|
3-2. Fix pack error when there is space character in fd path.
|
|
3-3. Correct help message error.
|
|
|
|
Version 1.2e
|
|
------------
|
|
1. Add DisableSecureCapsuleFlash flag in [Others] section in platform.ini
|
|
to enable/disable flash secure BIOS on normal platform.
|
|
2. Update AT-p behavior. It does NOT check AT-p signature in plaform supported when flash EC only.
|
|
3. Add version check rule for OEM. (it must base on BIOS report.)
|
|
4. Add processing input argument for single package.
|
|
5. Support OEM message when flashing secure image on normal platform and normal image on secure platform.
|
|
6. Upadte iFdPacker to v2.2.5.
|
|
6-1. Add platform.ini pcak option in UI for Windows package.
|
|
6-2. Modify ini pack flag for command line.
|
|
6-3. Disable platform.ini pack option when secure image detected for DOS and Shell package.
|
|
6-4. Fix the parameter checking behavior for command line mode.
|
|
7. It can base on BIOS settings from IHISI 11h to do version, model name and same version check.
|
|
|
|
Version 1.2d
|
|
------------
|
|
1. Support -option command.
|
|
2. platform.ini support case insensitive.
|
|
3. Ignore shell flash command, when image is secure capsule.
|
|
4. Add shell single package support.
|
|
5. Add iFdPacker tool to generate single package file.
|
|
6. Support to flash a secure capsule on a normal platform by normal flash method.
|
|
|
|
Version 1.2c
|
|
------------
|
|
1. Fix the issue that BIOS return do nothing action in secure flash update but AP do reboot.
|
|
2. Support common flash interface for ODM.
|
|
|
|
Version 1.2b
|
|
------------
|
|
1. Fix the issue that AP will show not support when flash EC or EC+BIOS with /ecp or /ecbp command.
|
|
2. Fix update BIOS address not correct issue.
|
|
|
|
Version 1.2a
|
|
------------
|
|
1. Support specified size of flash rom. Such as 5M(1M+4M), 6M(2M+4M) flash rom.
|
|
2. Support secure flash.
|
|
3. Add platform.ini for security flash. (The platform.ini does not supported in shell flash now.)
|
|
4. Add do nothing action for 48h. And add some command for secure flash action override. /r for reboot, /s for shutdown, /n for do nothing.
|
|
5. Add EFI driver version check for secure BIOS flash.
|
|
|
|
Version 1.1o
|
|
------------
|
|
1.Fix only region with error file name cannot stop to flash.
|
|
2.Add "vrt:" and "rt:" command.
|
|
3.Add "ecp" and "ecbp" feature.
|
|
4.Get SMI command port via ACPI table.
|
|
5.Fix to flash bios with "mc" will show error.
|
|
6.Support skip block flash feature.
|
|
7.Fix the region may not be protected when start address + size equal to 0x100000000 which overflow of DWORD size.
|
|
|
|
Version 1.1n
|
|
------------
|
|
1.Fix more than 4G memory cannot flash.
|
|
2.Support 16M platform.
|
|
3.Fix "/e" feature.
|
|
|
|
Version 1.1m
|
|
------------
|
|
1.Fixed can not run shell flash on other platform which SMI common port is not 0xB2.
|
|
2.Fixed can not get rom file when current volume is not fs0.
|
|
3.Added tool and BIOS hand shaking feature.
|
|
Tool send BIOS information that include tool and OS version by functoin 10h.
|
|
Get the customer vendor ID in function 10h.
|
|
4.Added function 1Ch to check AT-p support by IHISI spec version 1.8.5.
|
|
5.Modified the function 10h by IHISI spec version 1.8.5.
|
|
6.Fixed when flash only BIOS region with only BIOS binary file will flash wrong address.
|
|
|
|
Version 1.1l
|
|
------------
|
|
1.Modify Me flash feature.
|
|
Support separate ME binary, and two type of Me:
|
|
1.FULL SKU.
|
|
2.Ignition SKU.
|
|
|
|
Version 1.1k
|
|
------------
|
|
1.Sort the help list.
|
|
2.Fixed the tool can't get the file name in a folder.
|
|
|
|
Version 1.1j
|
|
------------
|
|
1.Modify x64 to support 8M.
|
|
|
|
Version 1.1i
|
|
------------
|
|
1.Modify to support 4M.
|
|
2.Add function 17h,12h,19h,1Ah 11h
|
|
|