1245 lines
54 KiB
INI
1245 lines
54 KiB
INI
; This file is Insyde H2OFFT (Flash Firmware Tool) configuration file.
|
|
; Because some setting items only supported on specific OS flash.
|
|
; Here use following method to identify each setting item.
|
|
; (dwsDWS) means the setting item supported on which OS flash.
|
|
; d means DOS normal flash.
|
|
; w means Windows normal flash.
|
|
; s means Shell normal flash.
|
|
; D means DOS secure flash.
|
|
; W means Windows secure flash.
|
|
; S means Shell secure flash.
|
|
|
|
;
|
|
; ***************************
|
|
;
|
|
; Supported Section List.
|
|
;
|
|
; ***************************
|
|
; | supports on
|
|
; -------------------------------------+---------------------------------
|
|
; [AC_Adapter] | DOS WIN SHELL Secure
|
|
; [AutoWakeup] | WIN Secure
|
|
; [Bios_Version_Check] | DOS WIN SHELL
|
|
; [BIOSVersionFormat] | DOS WIN SHELL
|
|
; [CapsuleAudit] | DOS WIN
|
|
; [CommonFlash] | DOS WIN SHELL
|
|
; [FactoryCopy] | Secure
|
|
; [FDFile] | WIN
|
|
; [FlashComplete] | DOS WIN SHELL Secure
|
|
; [FlashSecureBIOSOverride] | DOS WIN SHELL
|
|
; [ForceFlash] | WIN SHELL Secure
|
|
; [Log_file] | WIN SHELL
|
|
; [MessageStringTable] | DOS WIN SHELL
|
|
; [MULTI_FD] | DOS WIN SHELL
|
|
; [Option] | WIN
|
|
; [Others] | DOS WIN SHELL Secure
|
|
; [ParamForBiosReference] | DOS WIN SHELL Secure
|
|
; [PassToBios] | DOS WIN SHELL Secure
|
|
; [PasswordCheck] | WIN
|
|
; [PermitFlashConditionalData] | DOS
|
|
; [PermitFlashVersion] | WIN
|
|
; [Platform_Check] | DOS WIN SHELL
|
|
; [PlatformVersion] | DOS WIN SHELL
|
|
; [PreFlash] | Secure
|
|
; [Region] | DOS WIN SHELL Secure
|
|
; [ReturnCodeDefinition] | WIN
|
|
; [ReturnErrorCode] | WIN
|
|
; [SecureUpdate] | WIN SHELL
|
|
; [UI] | WIN DOS SHELL
|
|
; [UpdateEC] | WIN SHELL Secure
|
|
; [UpdateOEMME] | WIN SHELL
|
|
; [UpdateDeviceFirmware] | Secure
|
|
; [Version] | WIN
|
|
;
|
|
|
|
; Supports on DOS WIN SHELL Secure flash.
|
|
[CommonFlash]
|
|
SwitchString=
|
|
ErrorMsg00=No error!
|
|
ErrorMsg01=AC detect error!
|
|
ErrorMsg02=DC detect error!
|
|
ErrorMsg03=DC gas gauge under xx%!
|
|
ErrorMsg04=BIOS version compare error!
|
|
ErrorMsg05=Model name compare error!
|
|
ErrorMsg10=Not support this version of Flash Common Interface!
|
|
ErrorMsg11=Show BIOS version string length more than xx bytes.
|
|
ErrorMsg12=Show model name string length more than xx bytes.
|
|
;
|
|
; WARNING!
|
|
; To disable this section need to remove entire [CommonFlash] section.
|
|
; When enable and BIOS supported, power check will take care by IHISI, and NOT reference [AC_Adapter].
|
|
;
|
|
;(dwsDWS)
|
|
;SwitchString default : empty.
|
|
; String : A switch flag setting string. Ex: "CPVER:[1] ACEN DCEN FHRST"
|
|
; Detail parameter please reference following table.
|
|
; Parameter | Description
|
|
; -------------+----------------------------------------------
|
|
; PTEN | All protection enable.
|
|
; PTDIS | All protection disable.
|
|
; ACEN | AC protect checking enable.
|
|
; ACDIS | AC protect checking disable.
|
|
; DCEN | DC & Gangue protect checking enable.
|
|
; DCDIS | DC & Gangue protect checking disable.
|
|
; RESSEN | BIOS Regression enable.
|
|
; RESSDIS | BIOS Regression disable.
|
|
; PJMDEN | Project Model string protect checking enable.
|
|
; PJMDDIS | Project Model string protect checking disable.
|
|
; FHOS | System back to OS after flash BIOS completely.
|
|
; FHST | System directly shutdown after flash BIOS completely.
|
|
; FHRST | System directly reboot after flash BIOS completely.
|
|
; CPVER:[Num] | Common Flash Version information
|
|
; | ex: [Num] is decimal and start from 1.
|
|
; -------------+----------------------------------------------
|
|
;(dwsDWS)
|
|
;ErrorMsg00 default : empty.
|
|
; String : The message of no error.
|
|
;(dwsDWS)
|
|
;ErrorMsg01 default : empty.
|
|
; String : AC error message.
|
|
;(dwsDWS)
|
|
;ErrorMsg02 default : empty.
|
|
; String : DC error message.
|
|
;(dwsDWS)
|
|
;ErrorMsg03 default : empty.
|
|
; String : DC gas gauge under xx% message.
|
|
;(dwsDWS)
|
|
;ErrorMsg04 default : empty.
|
|
; String : BIOS version error message.
|
|
;(dwsDWS)
|
|
;ErrorMsg05 default : empty.
|
|
; String : Model name error message.
|
|
;(dwsDWS)
|
|
;ErrorMsg10 default : empty.
|
|
; String : No support this version of Flash Common Interface message.
|
|
;The number of ErrorMsg## is in hex.
|
|
|
|
; Supports on DOS flash.
|
|
[PermitFlashConditionalData]
|
|
PFCDFunctionEnable=0
|
|
Conditionalcount=3
|
|
Conditionaldata1=1,w,"0x0003","The BIOS image does not support the current hardware configuration.\nFlash update is aborted."
|
|
Conditionaldata2=2,w,"0x20DD","The BIOS image does not support the current hardware configuration.\nFlash update is aborted."
|
|
Conditionaldata3=2,w,"0x20DE","The BIOS image does not support the current hardware configuration.\nFlash update is aborted."
|
|
;(d)
|
|
;PFCDFunctionEnable
|
|
; default : 0.
|
|
; 0 : Function is disabled.
|
|
; 1 : Function is enabled.
|
|
; The function is enabled or disabled by the flag. If the flag is disabled, application will keep flash progress without conditional check.
|
|
;(d)
|
|
;Conditionalcount default : 0.
|
|
; Integer : Total count of conditional data.
|
|
;Conditionaldata#=[Data Type], [Data Format], [Data Field], [Message String]
|
|
; Base on data format you need and to add configure value by below data format field and data field.
|
|
;(d) Conditionaldata# : # support from 1~20.
|
|
;(d) [Data Type] : The type of Conditionaldata, when you have more than one conditional data need to check before flash, you can give them different type.
|
|
; It will allow flash when all types are pass.
|
|
; It also can use the same type with more than one conditional data, which means if one of the conditional data is pass, this type is pass.
|
|
; Ex: We have the following settings, Conditionaldata1 is type 0, and others are type 1.
|
|
; Conditionalcount=3
|
|
; Conditionaldata1=0,w,"0x1234","This BIOS is not allow to flash."
|
|
; Conditionaldata2=1,w,"0x1111","This BIOS is not allow to flash."
|
|
; Conditionaldata3=1,w,"0x1222","This BIOS is not allow to flash."
|
|
; When Conditionaldata1 is pass and Conditionaldata2 or Conditionaldata 3 is pass that will allow flash.
|
|
; Allow = data1 pass && (data2 pass || data3 pass).
|
|
;(d) [Data Format] : Can support different as binary, string, WORD, DWORD.
|
|
; b : The data format is binary.
|
|
; s : The data format is string.
|
|
; w : The data format is WORD.
|
|
; d : The data format is DWORD.
|
|
;(d) [Data Field] : Relative data base on data format.
|
|
; BINARY : If the data format is binary.
|
|
; Data field is HEX. The data is as like "AA BB 00 12 55".
|
|
; String : If the data format is string.
|
|
; Data field is string. The data is as like "Data.123.AABE.".
|
|
; WORD : If the data format is WORD.
|
|
; Data field is HEX and unit is a WORD length. The data is as like "0x1223".
|
|
; DWORD : If the data format is DWORD.
|
|
; Data field is HEX and unit is a DWORD length. The data is as like "0x12345678".
|
|
;(d) [Message string] : Define customize message string here.
|
|
; The message is pop up when flash utility get a process interrupted from BIOS.
|
|
; The message string is optional field.
|
|
; It will not pop any message if you do not provide message string in this field.
|
|
|
|
; Supports on DOS WIN SHELL flash.
|
|
[MULTI_FD]
|
|
Flag=0
|
|
InterTool=0
|
|
FD#01=IO,C0,5AABFE02,5AABFE02,BIOS.fd,ME.fd
|
|
FD#02=PCI,0,1F,2,80,FFFFFFFF,00007007,BIOS.fd,ME.fd
|
|
FD#03=MPCIIO,2,PCI-0-1F-0-00-FFFFFFFF-3B0B8086,IO-538-0100-0000,BIOS.fd,ME.fd
|
|
FD#04=ID,ModelName,BIOS.fd
|
|
FD#05=OS,32,32bios.bin,,32.ini
|
|
FD#06=OS,64,64bios.bin,me.bin,64.ini
|
|
FD#07=MEMORY,FF679000,FFFFFFFF,A2346578,BIOS.fd,ME.bin,config.ini
|
|
FD#08=CPUID,FFFFFFFF,000406E3,BIOS.fd,ME.bin,config.ini
|
|
;(dwsDWS)
|
|
;Flag default : 0.
|
|
; 0 : Normal mode.
|
|
; 1 : Multi-FD mode. It will reference FD#XX values.
|
|
;(W)
|
|
;InterTool default : 0
|
|
; 0 : Disable.
|
|
; 1 : Enable. H2OFFT will copy all FD files which list in MULTI_FD section and using intermediate tool to decide which condition is match this platform and which binary need to flash.
|
|
; NOTE: This feature only support secure falsh via ESP method.
|
|
; Please only use it when the Windows multi FD condition cannot satisfy your project.
|
|
; Such as the memory address you want to use is outside the support range or you want to use IO method.
|
|
;(dwsDWS)
|
|
;FD#XX Integer : XX is decimal number from 01 to 99. (FD#01 ~ FD#99)
|
|
;This section supports IO space type, PCI address type and multiple condition type.
|
|
;FD#XX=IO,[Offset],[Mask],[Value],[BIOS Filename],[ME Filename],[INI Filename]
|
|
;FD#XX=PCI,[Bus],[Device],[Function],[Offset],[Mask],[Value],[BIOS Filename],[ME Filename],[INI Filename]
|
|
;FD#XX=MPCIIO,[Condition Number],PCI-[Bus]-[Device]-[Function]-[Offset]-[Mask]-[Value],IO-[Offset]-[Mask]-[Value],[BIOS Filename],[ME Filename],[INI Filename]
|
|
;FD#XX=ID,[Model Name],[BIOS Filename],[ME Filename],[INI Filename]
|
|
;FD#XX=OS,[OS Version],[BIOS Filename],[ME Filename],[INI Filename]
|
|
;FD#XX=MEMORY,[Physical Address],[Mask],[Value],[BIOS Filename],[ME Filename],[INI Filename]
|
|
;FD#XX=CPUID,[Mask],[Value],[BIOS Filename],[ME Filename],[INI Filename]
|
|
;(dsDS) {IO condition}
|
|
;(dwsDWS) {PCI condition}
|
|
;(dwsDWS) {ID condition}
|
|
;(wW) {OS condition}
|
|
;(dwsDWS) {MEMORY condition}
|
|
;(wW) {CPUID condition}
|
|
;(dwsDWS) [Offset] : Offset in hex.
|
|
;(dwsDWS) [Mask] : IO and MEMORY type supports BYTE, WORD and DWORD in hex.
|
|
; For example, BYTE -> 03, WORD -> 0A01, DWORD 100400D3
|
|
; PCI and CPUID type supports DWORD in hex only.
|
|
;(dwsDWS) [Value] : IO and MEMORY type supports BYTE, WORD and DWORD in hex.
|
|
; PCI type supports DWORD in hex only.
|
|
;(dwsDWS) [Model Name] : The platform ID, model name string.
|
|
;(wW) [OS Version] : 32bit or 64bit OS. 32 for 32bit OS, 64 for 64bit OS.
|
|
;(dws) [Physical Address] : A DWORD value in hex. Value range 0xFE000000 ~ 0xFFFFFFFF.
|
|
;(dwsDWS) [BIOS Filename] : BIOS filename.
|
|
;(w) [ME Filename] : ME filename. If it exists, utility will run OEMME flash feature.
|
|
;(dw) [INI Filename] : INI filename for overwrite.
|
|
; If it exists, utility will load the new ini file and overwrite all sections (except [MULTI_FD]) exist in new ini file.
|
|
;When [Offset] & [Mask] == [Value], it will flash the following files ([BIOS Filename] and [ME Filename]).
|
|
|
|
; Supports on WIN flash.
|
|
[Version]
|
|
Version=
|
|
;H2OFFT (Flash Firmware Tool) will append the version string at title bar.
|
|
;(wW)
|
|
;Version default : empty.
|
|
; String : Version number string for display.
|
|
; It will be show on UI, and append on current version number.
|
|
; When current version is 5.01 and this version string set to "12", then it will show "H2OFFT V5.01.12" on main dialog caption.
|
|
|
|
; Supports on WIN DOS SHELL flash.
|
|
[UI]
|
|
Confirm=1
|
|
Silent=0
|
|
SilentWithDialog=0
|
|
DisplayID=1
|
|
InsydeInfo=1
|
|
VersionInfo=1
|
|
GroupInfo=1
|
|
ConfirmInfo=0
|
|
ConfirmInfoRDate=0
|
|
OnFlashingBeep=0
|
|
OnFlashingBeepDelayTime=800
|
|
DisableMouseAndKeyboardInput=1
|
|
BeforeRunToolDelayTime=0
|
|
ProgramStartToWrongMessageBox=0
|
|
GetFDFileButton=0
|
|
DelayBeforeFlash=0
|
|
ConfirmDialogCustomizeMessage=
|
|
ShowCustomizeMessageOnConfirmDialogOnly=0
|
|
ShowUpdateROMAddress=0
|
|
Elapse=0
|
|
DisableAccessRightWarningMessage=0
|
|
DisableAccessRightCheck=0
|
|
PassUpdateProgressToBios=1
|
|
ShowEcUpdateProgress=0
|
|
ExtEcUpdateErrorMessage=""
|
|
NotShowIconOnMessageBox=0
|
|
PauseWhenUpdateBinaryWithoutBiosFail=0
|
|
IndentSpace=27
|
|
IndentSpace2=16
|
|
;(wW)
|
|
;Confirm default : 1.
|
|
; 0 : Don't display confirm dialog.
|
|
; 1 : Display confirm dialog.
|
|
;(wW)
|
|
;Silent default : 0.
|
|
; 0 : Normal mode.
|
|
; 1 : Silent mode, hide main dialog.
|
|
;(wW)
|
|
;SilentWithDialog default : 2.
|
|
; 0 : Don't display any dialog.
|
|
; 1 : Display main dialog only.
|
|
; 2 : Display all dialogs except main dialog.
|
|
;(wW)
|
|
;DisplayID default : 1.
|
|
; 0 : Don't display BIOS ID.
|
|
; 1 : Display BIOS ID.
|
|
;(wW)
|
|
;InsydeInfo default : 1.
|
|
; 0 : Don't display Insyde copyright information and URL.
|
|
; 1 : Display Insyde copyright information and URL.
|
|
;(wW)
|
|
;VersionInfo default : 1.
|
|
; 0 : Don't display BIOS version.
|
|
; 1 : Display BIOS version.
|
|
;(wW)
|
|
;GroupInfo default : 1.
|
|
; 0 : Don't display group box.
|
|
; 1 : Display group box.
|
|
;(wW)
|
|
;ConfirmInfo default : 0.
|
|
; 0 : Don't display BIOS version and build date information in confirm dialog.
|
|
; 1 : Display BIOS version and build date information in confirm dialog.
|
|
;(wW)
|
|
;ConfirmInfoRDate default : 0.
|
|
; 0 : Don't display BIOS version and release date information in confirm dialog.
|
|
; 1 : Display BIOS version and release date information in confirm dialog.
|
|
; When this flag set to 1, the ConfirmInfo flag won't be referenced.
|
|
;(w)
|
|
;OnFlashingBeep default : 0.
|
|
; 0 : Don't beep on flashing.
|
|
; 1 : Beep on flashing.
|
|
;(w)
|
|
;OnFlashingBeepDelayTime
|
|
; default : 800. (Unit is millisecond)
|
|
; Integer : Set beep delay time (milliseconds).
|
|
;(wW)
|
|
;DisableMouseAndKeyboardInput
|
|
; default : 0.
|
|
; 0 : Don't hook mouse and keyboard.
|
|
; 1 : Hook mouse and keyboard without "CTRL+ALT+DEL".
|
|
;(wW)
|
|
;BeforeRunToolDelayTime
|
|
; default : 0. (Unit is second)
|
|
; Integer : Delay number of seconds before flash process.
|
|
; The delay will be do in program initial and before load driver.
|
|
;(wW)
|
|
;ProgramStartToWrongMessageBox
|
|
; default : 0.
|
|
; 0 : Don't pop-up warning dialog before flash process.
|
|
; 1 : Pop-up a warning dialog before flash process.
|
|
;(wW)
|
|
;GetFDFileButton default : 0.
|
|
; 0 : Hide FD file browse button.
|
|
; 1 : Show the button for browsing FD file.
|
|
;(wW)
|
|
;DelayBeforeFlash default : 0. (Unit is second)
|
|
; Integer : Delay number of seconds before flashing.
|
|
;(wW)
|
|
;ConfirmDialogCustomizeMessage
|
|
; default : empty.
|
|
; String : A key name which list in [MessageStringTable].
|
|
; For inserting additional notification message in confirm dialog.
|
|
;(wW)
|
|
;ShowCustomizeMessageOnConfirmDialogOnly
|
|
; default : 0
|
|
; 0 : Display default confirm message and insert the customize message on confirm dialog.
|
|
; 1 : Do not display default confirm message, only show customize message on confirm dialog.
|
|
;(d)
|
|
;ShowUpdateROMAddress
|
|
; default : 0
|
|
; 0 : Show progress bar when updating BIOS.
|
|
; 1 : Show ROM address when updating BIOS.
|
|
;(dwsDWS)
|
|
;Elapse default : 0
|
|
; 0 : Disable to show elapse time during progressing BIOS update.
|
|
; 1 : Enable to show elapse time during progressing BIOS update.
|
|
;(wW)
|
|
;DisableAccessRightWarningMessage
|
|
; default : 0
|
|
; 0 : It will show warning message when any region is locked (such as ME) in input image.
|
|
; 1 : Do not show warning message when any region is locked in input image.
|
|
;(wW)
|
|
;DisableAccessRightCheck
|
|
; default : 0
|
|
; 0 : It will check access right when any one region flag of [Region] section is set.
|
|
; 1 : It will not do access right check.
|
|
;(DWS)
|
|
;PassUpdateProgressToBios
|
|
; default : 0
|
|
; 0 : Do not pass update progress to BIOS.
|
|
; 1 : It will pass update progress to BIOS during flash.
|
|
;(DWS)
|
|
;ShowEcUpdateProgress
|
|
; default : 1
|
|
; 0 : Hide the EC update progress during EC updating.
|
|
; 1 : Show the EC update progress during EC updating.
|
|
;(WS)
|
|
;ExtEcUpdateErrorMessage
|
|
; default : Empty
|
|
; String : The error to display when extern EC update failed.
|
|
;(WS)
|
|
;ExtEcUpdateErrorMessage###
|
|
; default : Empty
|
|
; String : The error to display when extern EC update failed.
|
|
; ### is the return code (from IHISI) in Hex. Value range from 1 ~ FFFFFFFF.
|
|
; When the return code is 0x00000005 the ExtEcUpdateErrorMessage5 will be used.
|
|
; When the return code is 0x00100002 the ExtEcUpdateErrorMessage100002 will be used.
|
|
;(wW)
|
|
;NotShowIconOnMessageBox
|
|
; default : 0
|
|
; 0 : Show question, information, warning, error icon on message box.
|
|
; 1 : Not show icon, only message string on message box.
|
|
;(DWS)
|
|
;PauseWhenUpdateBinaryWithoutBiosFail
|
|
; default : 0
|
|
; Update binary without BIOS means only update EC, native ME, ISH, PDT, IOM, MGPHY, TBT, Retimer but no BIOS binary.
|
|
; 0 : Not pause when it failed on updating binary without BIOS case.
|
|
; This seeting need to use in Windows capsule update to prevent user confused.
|
|
; Because in Windows capsule update the message will not be displaied.
|
|
; 1 : Pause to let user see the error.
|
|
;(DWS)
|
|
;IndentSpace default : 27
|
|
; Integer (0 ~ 27) : The indent space count of model nmae / BIOS version message.
|
|
; When the value set to 0, the message will be displayed at left side of screen without any indent space character.
|
|
;(DWS)
|
|
;IndentSpace2 default : 16
|
|
; Integer (0 ~ 27) : The indent space count of "Update XXX start..." and "Update XXX Progress:" message.
|
|
; When the value set to 0, the message will be displayed at left side of screen without any indent space character.
|
|
|
|
; Supports on WIN flash.
|
|
[Option]
|
|
Flag=0
|
|
;(wW)
|
|
;Flag default : 0.
|
|
; 0 : Auto flash mode.
|
|
; 1 : User option mode, including start, exit buttons.
|
|
; 2 : User flash mode, including start, exit buttons.
|
|
|
|
; Supports on WIN flash.
|
|
[FDFile]
|
|
FileName=
|
|
;(wW)
|
|
;FileName default : empty.
|
|
; String : Utility always load this file.
|
|
; If the FileName is empty, utility will search current directory
|
|
; and load the first found FD file.
|
|
|
|
; Supports on DOS WIN SHELL flash.
|
|
[AC_Adapter]
|
|
Flag=1
|
|
BatteryCheck=1
|
|
BatteryBound=30
|
|
LauncherAcWarning=messagestringA02
|
|
SecurityAcWarning=messagestringA02
|
|
AcNotConnectError=messagestringA05
|
|
DcNotConnectError=messagestringA06
|
|
DcNotEnoughError=messagestringA07
|
|
;(dwsDWS)
|
|
;Flag default : 1.
|
|
; 0 : Don't check AC power and battery life percentage.
|
|
; Skip power check and continue flash.
|
|
; 1 : Check AC power not check battery life percentage.
|
|
; Only AC power meets the requirement can continue flash.
|
|
; 2 : Check battery life percentage not check AC power.
|
|
; Only DC power meets the requirement can continue flash.
|
|
; 3 : Check AC power and battery life percentage.
|
|
; Both AC and DC power meet the requirement can continue flash.
|
|
; 4 : Check AC power or battery life percentage.
|
|
; One of AC or DC power meets the requirement can continue flash.
|
|
;(dwsDWS)
|
|
;BatteryCheck default : 0. This setting will not be referenced when the value of flag >= 2.
|
|
; 0 : Don't check battery life percentage
|
|
; 1 : Check battery life percentage
|
|
;(dwsDWS)
|
|
;BatteryBound default : 20.
|
|
; Integer (1~100) : Low battery boundary (percentage).
|
|
; When BatteryCheck=1 this value will be referenced.
|
|
; And only when the battery life percentage is bigger than inputted value, it can do flash.
|
|
;(dsDS)
|
|
;LauncherAcWarning default : messagestringA02
|
|
; String : A key name which list in [MessageStringTable].
|
|
;(dwsDWS)
|
|
;SecurityAcWarning default : messagestringA02
|
|
; String : A key name which list in [MessageStringTable].
|
|
;(wW)
|
|
;AcNotConnectError default : messagestringA05
|
|
; String : A key name which list in [MessageStringTable].
|
|
;(wW)
|
|
;DcNotConnectError default : messagestringA06
|
|
; String : A key name which list in [MessageStringTable].
|
|
;(wW)
|
|
;DcNotEnoughError default : messagestringA07
|
|
; String : A key name which list in [MessageStringTable].
|
|
|
|
; Supports on DOS WIN SHELL flash.
|
|
[Platform_Check]
|
|
Flag=1
|
|
NotTargetPlatformErrorMessage="This BIOS is not for your Notebook PC."
|
|
PlatformName1=AA
|
|
PlatformName2=BB
|
|
PlatformName3=
|
|
PlatformName4=
|
|
PlatformName5=
|
|
PlatformName6=
|
|
PlatformName7=
|
|
PlatformName8=
|
|
PlatformName9=
|
|
PlatformName10=
|
|
PlatformName11=
|
|
PlatformName12=
|
|
PlatformName13=
|
|
PlatformName14=
|
|
PlatformName15=
|
|
PlatformName16=
|
|
PlatformName17=
|
|
PlatformName18=
|
|
PlatformName19=
|
|
PlatformName20=
|
|
;This flag is the switch of comparing BIOS project ID with ROM file project ID.
|
|
;(dwsDWS)
|
|
;Flag default : 3.
|
|
; 0 : Don't check project ID.
|
|
; 1 : Check project ID of new file.
|
|
; If ID is different with current BIOS, the utility will close.
|
|
; 2 : Utility will compare current platform ID with the 20 platform IDs.
|
|
; If anyone is match, it will go ahead, otherwise utility will close.
|
|
; 3 : Does tool need to do platform check is depend on onboard BIOS report.
|
|
; When BIOS report not to check from IHISI, it is the same as Flag=0.
|
|
; When BIOS report need to check from IHISI, it is the same as Flag=1.
|
|
;(wsWS)
|
|
;NotTargetPlatformErrorMessage
|
|
; default : "This BIOS is not for your Notebook PC."
|
|
; String : User defined error message when input BIOS model name is not match with platform model name.
|
|
;(dwsDWS)
|
|
;PlatformName1~20 default : empty.
|
|
; String : If ROM file do not contain correct ID, user can define ID here.
|
|
|
|
; Supports on DOS WIN SHELL flash.
|
|
[PlatformVersion]
|
|
Flag=0
|
|
Version1=
|
|
Version2=
|
|
Version3=
|
|
Version4=
|
|
Version5=
|
|
Version6=
|
|
Version7=
|
|
Version8=
|
|
Version9=
|
|
Version10=
|
|
Version11=
|
|
Version12=
|
|
Version13=
|
|
Version14=
|
|
Version15=
|
|
Version16=
|
|
Version17=
|
|
Version18=
|
|
Version19=
|
|
Version20=
|
|
;This section only available when the [Platform_Check] is enable to compare the 20 platform IDs.
|
|
;The Version is pair with the PlatformName.
|
|
;For example: When the platform ID matches with PlatformName2, the Version2 will be used.
|
|
;(dwsDWS)
|
|
;Flag default : 0.
|
|
; 0 : Don't use multi version.
|
|
; 1 : Use the version in the list instead of the version in file.
|
|
;(dwsDWS)
|
|
;Version1~20 default : empty.
|
|
; String : If ROM file do not contain correct version, user can define version here.
|
|
|
|
; Supports on DOS WIN SHELL flash.
|
|
[Bios_Version_Check]
|
|
Flag=2
|
|
SameVersionErrorMessage="The version of ROM file is the same as that of BIOS."
|
|
OlderVersionErrorMessage="The version of ROM file is not newer than that of BIOS."
|
|
CheckByBiosErrorMessage="This BIOS file is not allow to flash. The flash process will be terminated."
|
|
;This flag is the switch of checking BIOS version.
|
|
;(dwsDWS)
|
|
;Flag default : 2.
|
|
; 0 : Don't check BIOS version.
|
|
; 1 : Check BIOS version by tool.
|
|
; When BIOS version in file is older than onboard BIOS, it will display a warning message and close application.
|
|
; Does same version allow to flash depend on BIOS report (from IHISI).
|
|
; 2 : Does tool need to do version check is depend on onboard BIOS report (from IHISI).
|
|
; When BIOS report not to check from IHISI, it is the same as Flag=0.
|
|
; When BIOS report need to check from IHISI, it is the same as Flag=1.
|
|
; 3 : Check BIOS version by BIOS only. (Application will not do version check.)
|
|
; 4 : Check BIOS version by BIOS and application. After it pass version check by BIOS, it will do version check by application.
|
|
; Only pass both BIOS and application check allow to flash.
|
|
;(wsWS)
|
|
;SameVersionErrorMessage
|
|
; default : "The version of ROM file is the same as that of BIOS."
|
|
; String : User defined error message when input BIOS version is the same as platform BIOS version.
|
|
;(wsWS)
|
|
;OlderVersionErrorMessage
|
|
; default : "The version of ROM file is not newer than that of BIOS."
|
|
; String : User defined error message when input BIOS version is older than platform BIOS version.
|
|
;(dwsDWS)
|
|
;CheckByBiosErrorMessage
|
|
; default : "This BIOS file is not allow to flash. The flash process will be terminated."
|
|
; String : User defined error message when BIOS is not allow to flash this version image.
|
|
|
|
; Supports on DOS WIN SHELL flash.
|
|
[BIOSVersionFormat]
|
|
BIOSVFEnable=1
|
|
VersionFormat=XXXXNNXXDDDDDDD
|
|
;This BIOSVFEnable flag is the switch of BIOSVersionFormat.
|
|
;(dwsDWS)
|
|
;BIOSVFEnable default : 0
|
|
; 0 : Function is disabled.
|
|
; 1 : Function is enabled.
|
|
;(dwsDWS)
|
|
;VersionFormat X : The field is masked. It will NOT be compared.
|
|
; N : The digit field can be ASCII, case-sensitive.
|
|
; T : It's the same definition with N. But T is a case-insensitive.
|
|
; . : Dot is also a mask. It will NOT be compared.
|
|
; D : Don't care field. It will NOT be compared.
|
|
; This field can be empty.
|
|
; It only allow to put at start or end of the version format.
|
|
; For example: Onboard version 1.21B flash to 1.22, VersionFormat must be N.NND
|
|
; N.NND means the valid format is N.NN and N.NNX, the 5th character will be ignore in version compare.
|
|
|
|
; Supports on WIN flash.
|
|
[PermitFlashVersion]
|
|
PFVFunctionEnable=0
|
|
SingleVersion=
|
|
MultiVersion1=
|
|
MultiVersion2=
|
|
MultiVersion3=
|
|
MultiVersion4=
|
|
MultiVersion5=
|
|
MultiVersion6=
|
|
MultiVersion7=
|
|
MultiVersion8=
|
|
MultiVersion9=
|
|
MultiVersion10=
|
|
MultiVersion11=
|
|
MultiVersion12=
|
|
MultiVersion13=
|
|
MultiVersion14=
|
|
MultiVersion15=
|
|
MultiVersion16=
|
|
MultiVersion17=
|
|
MultiVersion18=
|
|
MultiVersion19=
|
|
MultiVersion20=
|
|
;This section is for conditional version definition for BIOS update.
|
|
;When this function enabled, flash utility will compare on board BIOS version with conditional version and then decide to continue flash progress or not.
|
|
;For example: In following condition PFVFunctionEnable=1, SingleVersion=A03, "Please update to BIOS version A03 first!".
|
|
; When on board BIOS version is older than A03,
|
|
; it will pop up the error dialog with the message "Please update to BIOS version A03 first!" and then terminated.
|
|
; Otherwise it will continue original flash process.
|
|
;The MultiVersion1~20 are similar as SingleVersion, but they only available when the [Platform_Check] is enable to compare the 20 platform IDs.
|
|
;They must be pair of the PlatformName of [Platform_Check] section.
|
|
;For example: When the platform ID matches with PlatformName2, the Version2 will be used.
|
|
;(wW)
|
|
;PFVFunctionEnable default : 0.
|
|
; 0 : Disable conditional version check.
|
|
; 1 : Enable conditional version check.
|
|
;(wW)
|
|
;SingleVersion default : empty.
|
|
; String : XXXX, "Message String"
|
|
; XXXX is the conditional version, regarding version check rule please refer section "BIOSVersionFormat".
|
|
; "Message String" is the message to show when the on board BIOS version is older than the conditional version.
|
|
;(wW)
|
|
;MultiVersion1~20 default : empty.
|
|
; String : XXXX, "Message String"
|
|
; XXXX is the conditional version, regarding version check rule please refer section "BIOSVersionFormat".
|
|
; "Message String" is the message to show when the on board BIOS version is older than the conditional version.
|
|
;
|
|
; The section is depended on other sections if using [PermitFlashVersion].
|
|
; a. If single version is enabled,
|
|
; Please also configure section [Bios_Version_Check] for version check
|
|
; b. If multi-version is enabled,
|
|
; Please also configure following sections [Bios_Version_Check] for version check,
|
|
; section [Platform_Check] for platform name check and section [PlatformVersion] for multi-platform version check
|
|
|
|
; Supports on DOS WIN SHELL Secure flash.
|
|
[FlashComplete]
|
|
Action=2,0
|
|
Dialog=0
|
|
Counter=15
|
|
ActionOverride=0
|
|
Pause=0
|
|
PauseWarning=messagestringA03
|
|
SecureFlashDelayBeforeExit=5
|
|
ShutdownRebootTimeOut=0
|
|
ShutdownRebootForceCloseApp=1
|
|
;(dwsDWS)
|
|
;Action default : 2.
|
|
; 0 : Do nothing. Return to OS.
|
|
; 1 : Shutdown.
|
|
; 2 : Reboot.
|
|
;(w)
|
|
;Dialog default : 0.
|
|
; 0 : Don't display dialog.
|
|
; 1 : Display dialog.
|
|
; 2 : Display dialog and wait several seconds.
|
|
;(w)
|
|
;Counter default : 15. (Unit is second)
|
|
; Integer : The number of seconds for countdown to reboot or shutdown.
|
|
;(w)
|
|
;ActionOverride default : 0
|
|
; 0 : This key is disabled. Flash utility bases action key setting to do original behavior.
|
|
; 1 : This key is enabled. Flash utility just does close itself in silent mode.
|
|
;(dwsDWS)
|
|
;Pause default : 0.
|
|
; 0 : Not pause after flash complete.
|
|
; 1 : Pause after flash complete.
|
|
;(dwsDWS)
|
|
;PauseWarning default : messagestringA03
|
|
; String : A key name which list in [MessageStringTable].
|
|
;(DWS)
|
|
;SecureFlashDelayBeforeExit
|
|
; default : 5. (Unit is second)
|
|
; Integer : The number of seconds for delay before secure flash exit.
|
|
;(wW)
|
|
;ShutdownRebootTimeOut
|
|
; default : 0. (Unit is second)
|
|
; Integer : The number of seconds for delay before Windows shutdown/reboot.
|
|
; When this value is not 0, it may display a shutdown/reboot dialog on Windows top.
|
|
;(wW)
|
|
;ShutdownRebootForceCloseApp
|
|
; default : 1.
|
|
; 0 : The system displays a dialog box instructing the user to close the applications.
|
|
; 1 : Applications with unsaved changes are to be forcibly closed. Note that this can result in data loss.
|
|
;The value behind comma is the return value in silent mode.
|
|
|
|
; Supports on DOS WIN SHELL flash.
|
|
[FlashSecureBIOSOverride]
|
|
EnableFlashSecureBIOSOverride=1
|
|
Action=1,3
|
|
;(DWS)
|
|
;EnableFlashSecureBIOSOverride
|
|
; default : 0.
|
|
; 0 : Disable action override. Use the action which returned from BIOS.
|
|
; 1 : Enable the action override when flashing secure BIOS in OS.
|
|
;(DWS)
|
|
;Action default : 1.
|
|
; 0 : S3.
|
|
; 1 : Reboot.
|
|
; 2 : Shutdown.
|
|
; 3 : Do nothing.
|
|
;The value behind comma is the return value in silent mode.
|
|
|
|
; Supports on DOS WIN SHELL Secure flash.
|
|
[ForceFlash]
|
|
ALL=1
|
|
BB_PEI=0
|
|
CPU_Microcode=0
|
|
Variable=0
|
|
DXE=0
|
|
EC=0
|
|
Password=0
|
|
OEM_NVS=0
|
|
Logo=0
|
|
Type#09=0
|
|
Type#08=0
|
|
UseBvdtRomMap=0
|
|
;These areas are reported by IHISI from BIOS for protection.
|
|
;When you set the value to 1, the selected protect area will be force flash.
|
|
;(dwsDWS)
|
|
;ALL default : 0.
|
|
; 0 : Reserve all protected areas.
|
|
; 1 : Flash all protected areas.
|
|
;(dwsDWS)
|
|
;BB_PEI, CPU_Microcode, Variable, DXE, EC, Password, OEM_NVS, Logo
|
|
; They are the predefined types each one indicate a type value.
|
|
; BB_PEI = Type#00
|
|
; CPU_Microcode = Type#01
|
|
; Variable = Type#02
|
|
; DXE = Type#03
|
|
; EC = Type#04
|
|
; Password = Type#0F
|
|
; OEM_NVS = Type#10
|
|
; Logo = Type#05
|
|
; default : 0.
|
|
; 0 : Protect this area.
|
|
; 1 : Force flash this area.
|
|
;(dwsDWS)
|
|
;Type#NN Type#NN is an extended method for those didn't have predefine type.
|
|
; The NN is a number in Hex.
|
|
; For example:
|
|
; If BIOS report to protect type 13h from IHISI, and you want to flash this protect area.
|
|
; Then the setting in platform.ini can add Type#13=1.
|
|
; default : 0.
|
|
; 0 : Protect this area.
|
|
; 1 : Force flash this area.
|
|
;(DWS)
|
|
;UseBvdtRomMap default : 0.
|
|
; 0 : Disable private/protection ROM map override feature.
|
|
; AP will reference IHISI report to protect regions.
|
|
; 1 : Enable private/protection ROM map override feature.
|
|
; AP will reference BVDT defined map to protect regions.
|
|
|
|
; Supports on DOS WIN SHELL Secure flash.
|
|
[Region]
|
|
BIOS=1
|
|
GbE=0
|
|
ME=0
|
|
EC=0
|
|
DESC=0
|
|
Platform_Data=0
|
|
;This section is used to control SPI descriptor mode.
|
|
;Default is flash all regions when the values all set to 0.
|
|
;If any one of the regions set to 1, it will only flash specific regions.
|
|
;If the BIOS is built without additional Intel firmware as like ME, GBE and Descriptor
|
|
; or BIOS is an AMD firmware which does not support ME, please ignore this section.
|
|
;(dwsDWS)
|
|
;BIOS default : 0.
|
|
; 0 : Don't flash.
|
|
; 1 : Flash BIOS region.
|
|
;(dwsDWS)
|
|
;GbE default : 0.
|
|
; 0 : Don't flash.
|
|
; 1 : Flash GbE region.
|
|
;(dwsDWS)
|
|
;ME default : 0.
|
|
; 0 : Don't flash.
|
|
; 1 : Flash ME region.
|
|
;(dwsDWS)
|
|
;EC default : 0.
|
|
; 0 : Don't flash.
|
|
; 1 : Flash EC region.
|
|
;(dwsDWS)
|
|
;DESC default : 0.
|
|
; 0 : Don't flash.
|
|
; 1 : Flash Descriptor region.
|
|
;(dwsDWS)
|
|
;Platform_Data default : 0.
|
|
; 0 : Don't flash.
|
|
; 1 : Flash Platform Data region.
|
|
|
|
; Supports on WIN SHELL Secure flash.
|
|
[UpdateEC]
|
|
Flag=0
|
|
EC_Dialog=0
|
|
BIOS_Only=0
|
|
EC_Only=0
|
|
EC_Path=
|
|
EC_Compare=0
|
|
EC_Verify=0
|
|
EC_VerifyErrorRetry=3
|
|
EC_BlockSize=64
|
|
EC_DockWarning=messagestringA04
|
|
;(w)
|
|
;Flag default : 0.
|
|
; 0 : Don't flash EC by BIOS.
|
|
; 1 : Flash EC by BIOS.
|
|
;(w)
|
|
;EC_Dialog default : 0.
|
|
; 0 : Don't display confirm dialog when begin to update EC.
|
|
; 1 : Show confirm dialog.
|
|
; This key only valid when Flag=1.
|
|
;(w)
|
|
;BIOS_Only default : 0.
|
|
; 0 : Flash EC and BIOS file.
|
|
; 1 : Only flash BIOS part of the EC merged BIOS binary file.
|
|
; This key only valid when Flag=1.
|
|
;(w)
|
|
;EC_Only default : 0.
|
|
; 0 : Flash EC and BIOS file.
|
|
; 1 : Only flash EC binary file.
|
|
; This key only valid when Flag=1.
|
|
;(w)
|
|
;EC_Path default : empty.
|
|
; String : EC filename.
|
|
; This key only valid when Flag=1.
|
|
;(wsWDS)
|
|
;EC_Compare default : 0.
|
|
; 0 : Don't do compare before writing. Just do write action directly.
|
|
; 1 : Read EC and compare difference before writing.
|
|
; If the read data is the same as the data we want to write,
|
|
; it will not do the write action.
|
|
;(wsWDS)
|
|
;EC_Verify default : 0.
|
|
; 0 : Don't verify EC.
|
|
; 1 : Verify EC after writing.
|
|
;(wsWDS)
|
|
;EC_VerifyErrorRetry
|
|
; default : 3.
|
|
; Integer : Retry times.
|
|
; If the value is not zero means enable verify retry, and will retry the setting times.
|
|
; 0 for disable verify retry.
|
|
;(WDS)
|
|
;EC_BlockSize default : 64.
|
|
; Integer : The block size of EC update. Unit is KB.
|
|
;(dsS)
|
|
;EC_DockWarning default : messagestringA04
|
|
; String : A key name which list in [MessageStringTable].
|
|
|
|
; Supports on WIN SHELL flash.
|
|
[UpdateOEMME]
|
|
MEFileName=
|
|
MEProgram=
|
|
CheckVersion=0
|
|
Command=
|
|
;(ws)
|
|
;MEFileName default : empty.
|
|
; String : If this field not empty or Multi-FD ME filename exists, tool will use Intel firmware update tool to update ME in OS before flash BIOS.
|
|
;(w)
|
|
;MEProgram default : empty.
|
|
; String : The Intel ME update program name. When this field is empty, tool will using default program name "FWUpdLcl.exe".
|
|
;(w)
|
|
;CheckVersion default : 0.
|
|
; 0 : Don't check ME file version.
|
|
; 1 : Check ME file version.
|
|
; 2 : When ME flash error is cause of same version and downgrade version do not show error and continue to flash.
|
|
; 3 : When ME flash error, show error but continue to flash.
|
|
;(ws)
|
|
;Command default : empty.
|
|
; String : When this field is empty and don't want to check ME version, utility will use "-f %filename -generic -allowsv" as default command.
|
|
; The %filename is a keyword which will be replaced with the value in MEFileName within this section or the filename in MULTI_FD section.
|
|
;NOTE:
|
|
; The Intel firmware update tool (FWUpdLcl.exe) is dependent on each chipset generation, and the tool in release flash package is a sample and may be not suitable for your project.
|
|
; Please remember to replace the FWUpdLcl.exe with right version before you will utilize function to update Intel firmware (ME or TXE).
|
|
|
|
; Supports on Secure flash.
|
|
[UpdateDeviceFirmware]
|
|
VerifyErrorRetry=0
|
|
;(DWS)
|
|
;VerifyErrorRetry default : 0. Don't verify after update.
|
|
; Integer : Retry times.
|
|
; When this value bigger than 0, means enable verifying device firmware after writing and it will retry the setting times.
|
|
; 0 for disable verify retry.
|
|
|
|
; Supports on WIN SHELL flash.
|
|
[Log_file]
|
|
Flag=0
|
|
FileName=H2OFFT.log
|
|
CMOS_Flag=0
|
|
CMOS_INDEX_PORT=70
|
|
CMOS_DATA_PORT=71
|
|
CMOS_OFFSET=68,69
|
|
;(wsWS)
|
|
;Flag default : 0.
|
|
; 0 : Don't log to file.
|
|
; 1 : Utility will log to specify file.
|
|
;(wsWS)
|
|
;FileName default : H2OFFT.log.
|
|
; String : Log filename.
|
|
;(wW)
|
|
;CMOS_Flag default : 0.
|
|
; 0 : Disable CMOS debug.
|
|
; 1 : Enable CMOS debug.
|
|
;(wW)
|
|
;CMOS_INDEX_PORT default : 70. (hex)
|
|
; 70 : Use 0x70 port as index port.
|
|
; 72 : Use 0x72 port as index port.
|
|
;(wW)
|
|
;CMOS_DATA_PORT default : 71. (hex)
|
|
; 71 : Use 0x71 port as index port.
|
|
; 73 : Use 0x73 port as index port.
|
|
;(wW)
|
|
;CMOS_OFFSET default : 0,0. (hex)
|
|
; CMOS_OFFSET=xx,yy the xx is high byte offset; yy is low byte offset, and the range is 0~FF (hex)
|
|
|
|
; Supports on WIN flash.
|
|
[ReturnErrorCode]
|
|
FileNotFound=3,259
|
|
ErrorBeforeFlash=4,259
|
|
BatteryNotConnect=4,259
|
|
BatteryCapacityNotEnough=4,259
|
|
WriteROMFail=5,259
|
|
WriteECFail=6,259
|
|
WriteExtraDataFail=7,259
|
|
OemOdmFuncFail=8,259
|
|
;(wW)
|
|
;FileNotFound default : 3.
|
|
; Integer : If utility cannot find the BIOS file, it will return this error code.
|
|
;(wW)
|
|
;ErrorBeforeFlash default : 4.
|
|
; Integer : If error occur before flash process, it will return this error code.
|
|
;(wW)
|
|
;BatteryNotConnect default : 4.
|
|
; Integer : If battery not connect, it will return this error code.
|
|
; (This error is separated from ErrorBeforeFlash.)
|
|
;(wW)
|
|
;BatteryCapacityNotEnough
|
|
; default : 4.
|
|
; Integer : If battery capacity not enough, it will return this error code.
|
|
; (This error is separated from ErrorBeforeFlash.)
|
|
;(wW)
|
|
;WriteROMFail default : 5.
|
|
; Integer : If error occur during write ROM process, it will return this error code.
|
|
;(wW)
|
|
;WriteECFail default : 6.
|
|
; Integer : If error occur during write EC process, it will return this error code.
|
|
;(wW)
|
|
;WriteExtraDataFail
|
|
; default : 7.
|
|
; Integer : If error occur during write Extra Data process, it will return this error code.
|
|
;(W)
|
|
;OemOdmFuncFail
|
|
; default : 8.
|
|
; Integer : If error occur when doing OEM/ODM specific function, it will return this error code.
|
|
;The value behind comma is the return value in silent mode.
|
|
|
|
; Supports on WIN flash.
|
|
[ReturnCodeDefinition]
|
|
RETURN_SUCCESSFUL=0,3010
|
|
RETURN_MODEL_CHECK_FAIL=259,259
|
|
RETURN_USER_CONFIRM_CANCEL=1701,259
|
|
RETURN_AC_NOT_CONNECT=1702,259
|
|
RETURN_LOAD_DRIVER_FAIL=1703,259
|
|
RETURN_NEED_REBOOT=3010,3010
|
|
RETURN_USER_EXIT=1704,259
|
|
RETURN_SAME_VERSION_CHECK=99999,259
|
|
;(wW)
|
|
;RETURN_SUCCESSFUL default : 0.
|
|
; Integer : Use input value as return code.
|
|
; 99999 : Use the default value above.
|
|
;(wW)
|
|
;RETURN_MODEL_CHECK_FAIL
|
|
; default : 259.
|
|
; Integer : Use input value as return code.
|
|
; 99999 : Use the default value above.
|
|
;(wW)
|
|
;RETURN_USER_CONFIRM_CANCEL
|
|
; default : 1602.
|
|
; Integer : Use input value as return code.
|
|
; 99999 : Use the default value above.
|
|
;(wW)
|
|
;RETURN_AC_NOT_CONNECT
|
|
; default : 1602.
|
|
; Integer : Use input value as return code.
|
|
; 99999 : Use the default value above.
|
|
;(wW)
|
|
;RETURN_LOAD_DRIVER_FAIL
|
|
; default : 259.
|
|
; Integer : Use input value as return code.
|
|
; 99999 : Use the default value above.
|
|
;(wW)
|
|
;RETURN_NEED_REBOOT
|
|
; default : 3010.
|
|
; Integer : Use input value as return code.
|
|
; 99999 : Use the default value above.
|
|
;(wW)
|
|
;RETURN_USER_EXIT default : 1602.
|
|
; Integer : Use input value as return code.
|
|
; 99999 : Use the default value above.
|
|
;(wW)
|
|
;RETURN_SAME_VERSION_CHECK
|
|
; default : 1602.
|
|
; Integer : Use input value as return code.
|
|
; 99999 : Use the default value above.
|
|
;The value behind comma is the return value in silent mode.
|
|
|
|
; Supports on DOS WIN SHELL Secure flash.
|
|
[Others]
|
|
DisableCompare=0
|
|
DisableVerify=0
|
|
VerifyErrorRetry=3
|
|
SMIErrorRetryDelay=100
|
|
SMIErrorRetry=5
|
|
ForceIHISIVersion=
|
|
EnablePrivateRegionMovement=0
|
|
EnableProtectionRegionMovement=0
|
|
DisableSecureCapsuleFlash=0
|
|
BootSafeMode=0
|
|
;(wsWS)
|
|
;DisableCompare default : 0.
|
|
; 0 : Read BIOS and compare difference before writing.
|
|
; If the read data is the same as the data we want to write,
|
|
; it will not do the write action.
|
|
; 1 : Don't do compare before writing. Just do write action directly.
|
|
;(wsWS)
|
|
;DisableVerify default : 0.
|
|
; 0 : Verify BIOS after writing.
|
|
; 1 : Don't verify BIOS after writing.
|
|
;(wsWS)
|
|
;VerifyErrorRetry default : 3.
|
|
; Integer : Retry times.
|
|
; If the value is not zero means enable verify retry, and will retry set times.
|
|
; 0 for disable verify retry.
|
|
;(wsWS)
|
|
;SMIErrorRetryDelay
|
|
; default : 100. (Unit is millisecond)
|
|
; Integer : Delay time during SMI error retry (millisecond).
|
|
;(wsWS)
|
|
;SMIErrorRetry default : 5.
|
|
; Integer : Retry times when SMI fail. (Note: This may let flash time become longer.)
|
|
;(w)
|
|
;ForceIHISIVersion default : empty.
|
|
; Version : This flag will force override the IHISI version which will passing to BIOS.
|
|
; Ex: 1.9.1
|
|
;(wsDWS)
|
|
;EnablePrivateRegionMovement
|
|
; default : 0
|
|
; 0 : Disable private region movement.
|
|
; 1 : Enable private region movement. It will backup orginal private regions and relocate to new address which defined in new image BVDT when update whole BIOS.
|
|
;(sDWS)
|
|
;EnableProtectionRegionMovement
|
|
; default : 0
|
|
; 0 : Disable protection region movement.
|
|
; 1 : Enable protection region movement. It will backup orginal protection regions and relocate to new address which defined in new image BVDT when update whole BIOS.
|
|
; This flag cannot be used with [ForceFlash] all=1.
|
|
;(dwsDWS)
|
|
;DisableSecureCapsuleFlash
|
|
; default : 0.
|
|
; 0 : Enable flash secure BIOS on normal platform.
|
|
; 1 : Disable flash secure BIOS on normal platform.
|
|
;(wW)
|
|
;BootSafeMode format : [Number],[Version String]
|
|
; [Number] default : 0.
|
|
; 0 : Disable this feature. Normal boot.
|
|
; 1 : Enable this feature. Next boot into Windows safe mode.
|
|
; [Version String] default : empty.
|
|
; The limit version.
|
|
; When onboard BIOS version smaller than or equal to this version, it allow to enable this feature.
|
|
; When onboard BIOS version bigger than this version, this feature always disable even the value is set to 1.
|
|
|
|
; Supports on WIN flash.
|
|
[PasswordCheck]
|
|
PasswordCheckEnable=0
|
|
MsgCaption=Password confirmation
|
|
MsgPreface=Please enter password
|
|
MsgSuccess=Password is correct.
|
|
MsgFailure=Password is incorrect. Please retry again.
|
|
;(wW)
|
|
;PasswordCheckEnable
|
|
; default : 0.
|
|
; 0 : Disable the password check function.
|
|
; 1 : Enable the password check function.
|
|
;(wW)
|
|
;MsgCaption default : "Password confirmation"
|
|
; String : The dialog box caption.
|
|
;(wW)
|
|
;MsgPreface default : "Please enter password"
|
|
; String : The preface of password entering.
|
|
;(wW)
|
|
;MsgSuccess default : "Password is correct."
|
|
; String : The string displayed when the comparing result returned by BIOS is 0x00.
|
|
;(wW)
|
|
;MsgFailure default : "Password is incorrect. Please retry again."
|
|
; String : The string displayed when the comparing result returned by BIOS is 0x01.
|
|
|
|
; Supports on DOS WIN Shell flash.
|
|
[MessageStringTable]
|
|
messagestring1="Warning message 1"
|
|
messagestringA00="It only supports to flash secure BIOS on current platform.\r\nThe image to be updated is not a secure BIOS.\r\n"
|
|
messagestringA01="Not allow to flash secure BIOS on current platform.\r\n"
|
|
messagestringA02="Please do not remove the AC power!"
|
|
messagestringA03="Press any key to continue..."
|
|
messagestringA04="Get EC part information fail."
|
|
messagestringA05="Insyde H2OFFT cannot run on battery power. Please plug in AC power and try again."
|
|
messagestringA06="Please insert system battery."
|
|
messagestringA07="Battery is too low (%d < %d). Please charge your battery to %d%%."
|
|
;(dwsDWS)
|
|
;messagestring# default : empty.
|
|
;The message string must as following format messagestring#="Your message here."
|
|
;The # is a number in Decimal or Hex.
|
|
;If a multi-line message is required, you can use "\n" in message string for new line.
|
|
|
|
; Supports on Secure flash.
|
|
[FactoryCopy]
|
|
Restore=0
|
|
;(DWS)
|
|
;Restore default : 0.
|
|
; 0 : Don't do FACTORY_COPY restore after flash.
|
|
; 1 : Restore FACTORY_COPY after flash BIOS.
|
|
;Factory copy is a region in BIOS which is used to store default keys of Secure Boot.
|
|
|
|
; Supports on DOS WIN flash.
|
|
[CapsuleAudit]
|
|
Flag=0
|
|
QAKey=
|
|
OemKey=
|
|
;(dw)
|
|
;Flag default : 0.
|
|
; 0 : Disable.
|
|
; 1 : Enable capsule update audit.
|
|
;(dw)
|
|
;QAKey default : empty.
|
|
; String : Capsule file which sign with Insyde QA test key.
|
|
;(dw)
|
|
;OemKey default : empty.
|
|
; String : Capsule file which sign with OEM/ODM key.
|
|
|
|
; Supports on WIN Shell flash.
|
|
[SecureUpdate]
|
|
viaESP=3
|
|
ViaESPCopyFileWaitingTime=0
|
|
FreeEspSpaceWhenNeed=1
|
|
DeviceOrder=eMMC, NVMe, SATA, ATAPI, USB
|
|
PhysicalMemoryAllocateFailRetryTimes=3
|
|
PhysicalMemoryAllocateFailRetryDelay=500
|
|
;(WS)
|
|
;viaESP default : 3.
|
|
; 0 : Disable.
|
|
; Pass capsule via memory only.
|
|
; 1 : Write the capsule to ESP (EFI system partition).
|
|
; Pass capsule via ESP only.
|
|
; Onboard BIOS need to support via ESP method, if BIOS not support then the update failed.
|
|
; 2 : Pass capsule via ESP and memory.
|
|
; It will copy capsule to ESP then pass capsule to BIOS via memory.
|
|
; It success when both steps are success, and failure when any one failed.
|
|
; 3 : Pass capsule via ESP or memory.
|
|
; It will try to update capsule via ESP first.
|
|
; When via ESP method failed it will use pass capsule to BIOS via memory.
|
|
; When via ESP method success it will return success.
|
|
; NOTE: DOS flash does not support via ESP method, if the setting need to run in DOS please set viaESP as 0 or 3.
|
|
;(WS)
|
|
;ViaESPCopyFileWaitingTime
|
|
; default : 0.
|
|
; Integer : The waiting time after ESP file copy, unit is second.
|
|
; To prevent file copy success but the file not actually write to disk, you can use this delay to wait hardware action done.
|
|
; The flash utility also has a mechanism to read back and compare to make sure the data is correct.
|
|
;(W)
|
|
;FreeEspSpaceWhenNeed
|
|
; default : 1.
|
|
; 0 : Do not try to delete file in ESP.
|
|
; 1 : Try to delete .log file in root folder of ESP.
|
|
;(S)
|
|
;DeviceOrder default : eMMC, NVMe, SATA, ATAPI, USB
|
|
; The FAT device detection sequence of secure flash via ESP feature.
|
|
; Now we support eMMC, NVMe, SATA, ATAPI, USB.
|
|
;(W)
|
|
;PhysicalMemoryAllocateFailRetryTimes
|
|
; default : 3.
|
|
; Integer : Retry times.
|
|
; If the value is not zero means enable physical memory allocate fail retry, and will retry the setting times.
|
|
; 0 for disable retry.
|
|
;(W)
|
|
;PhysicalMemoryAllocateFailRetryDelay
|
|
; default : 500. (Unit is millisecond)
|
|
; Integer : Delay time during secure update physical memory allocate fail retry (millisecond).
|
|
|
|
; Supports on WIN Secure flash.
|
|
[AutoWakeup]
|
|
Flag=0
|
|
Interval=120
|
|
;(wsWDS)
|
|
;Flag default : 0.
|
|
; 0 : Disable.
|
|
; 1 : Enable auto power on via RTC.
|
|
;(wsWDS)
|
|
;Interval default : 120.
|
|
; Integer : Unit is second. Interval time after system turn off.
|
|
|
|
; Supports on DOS WIN SHELL Secure flash.
|
|
[PassToBios]
|
|
ClearTXE=0
|
|
;(wdsWDS)
|
|
;ClearTXE default : 0.
|
|
; 0 : Disable.
|
|
; 1 : Tell BIOS to clear TXE at this flash.
|
|
|
|
; Supports on Secure flash.
|
|
[PreFlash]
|
|
EraseDataType=
|
|
;(WDS)
|
|
;EraseDataType default : Empty.
|
|
; Hex Value : The address and size of the data type must reported via IHISI.
|
|
; When the data type is not empty, flash utility will erase (fill with 0xFF) the area of the specific data type before flash.
|
|
; Note: In secure BIOS, the NV Storage will be always protected. If the specific data type is NV Storage, it will not take effect.
|
|
|
|
; Supports on DOS WIN SHELL Secure flash.
|
|
[ParamForBiosReference]
|
|
Param1=
|
|
Param2=
|
|
Param3=
|
|
Param4=
|
|
Param5=
|
|
Param6=
|
|
Param7=
|
|
Param8=
|
|
Param9=
|
|
Param10=
|
|
; This section used to pass specific parameter string to BIOS via IHISI 19h.
|
|
;(dwsDWS)
|
|
;Param1~20 default : empty.
|
|
; String : The parameter string you want to pass to BIOS.
|